CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Sanitary Tee Side Inlet (Right Hand HxHxHxH SI)-HR
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    (W1)

    (W2)

    (T)

    H1

    H2

    L1(LL)

    L2(LL)

    L3(LL)

    C1

    C2

    (D1)

    P1

    CAD

    N/A 75 x 75 x 75 x 40 N/A 166.0 mm N/A 147.9 mm N/A 199.4 mm N/A 38.5 mm N/A 19.5 mm N/A 122.4 mm N/A 76.2 mm N/A 70.1 mm N/A 114.7 mm N/A 130.7 mm N/A 100.5 mm N/A 88.9 mm N/A CAD Icon (for items table)
    N/A 75 x 75 x 75 x 50 N/A 166.0 mm N/A 142.1 mm N/A 199.4 mm N/A 38.5 mm N/A 19.5 mm N/A 122.4 mm N/A 76.2 mm N/A 71.6 mm N/A 114.7 mm N/A 130.7 mm N/A 100.5 mm N/A 88.9 mm N/A CAD Icon (for items table)
    N/A 100 x 100 x 100 x 50 N/A 207.2 mm N/A 166.7 mm N/A 244.5 mm N/A 45.2 mm N/A 19.7 mm N/A 154.0 mm N/A 96.8 mm N/A 82.6 mm N/A 142.1 mm N/A 170.7 mm N/A 127.5 mm N/A 114.3 mm N/A CAD Icon (for items table)
    1 - 3 of 3 | Results Per Page | View | Unit of Measure
    1