Sanitary Tee (T-Y) HxHxH (High Rise) -Metric
(17) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Sanitary-Tee--T-Y--HxHxH---HR.JPG
Sanitary Tee (T-Y) SxHxH (High Rise) -Metric
(12) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Sanitary-Tee--T-Y--SxHxH.JPG
Double Sanitary Tee (T-Y) HxHxHxH (High Rise) -Metric
(10) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
- Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
- Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
- Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
- Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Double-Snitary-Tee--T-Y--HxHxHxH.JPG
Sanitary Tee Side Inlet (Right Hand HxHxHxH SI) (High Rise) -Metric
(3) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Sanitary-Tee-Side-Inlet--Right-Hand-HxHxHxH-SI-.JPG
Sanitary Tee Side Inlet (Left Hand HxHxHxH SI) (High Rise) -Metric
(3) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Sanitary-Tee-Side-Inlet--Left-Hand-HxHxHxH-SI-.JPG
Double Sanitary Tee Side Inlet (HxHxHxHxH SI) (High Rise) -Metric
(3) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Double-Sanitary-Tee-Side-Inlet--HxHxHxHxH-SI-.JPG
Combo Wye & 1/8 Bend HxHxH (2 Piece) (High Rise) -Metric
(4) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Combo-Wye---1_8-Bend-HxHxH--2-Piece---HR.JPG
Single Apartment Fitting (All Hub) (High Rise) -Metric
HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Single-Apartment-Fitting--All-Hub-.JPG
Sanitary Tee Trap Adapter (High Rise) -Metric
HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Sanitary-Tee-Trap-Adapter.JPG
