CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Cap (H) - LR
LOW RISE

40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2
  • Certified by Intertek to CAN/ULC S102.2 for flame and smoke rating of the PVC compound to meet the flame spread (FSC) rating of 25 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    (W)

    H1

    (D1)

    P1

    CAD

    N/A 40 N/A 22.1 mm N/A 17.9 mm N/A 56.6 mm N/A 48.3 mm N/A CAD Icon (for items table)
    N/A 50 N/A 23.7 mm N/A 19.5 mm N/A 68.6 mm N/A 60.3 mm N/A CAD Icon (for items table)
    N/A 75 N/A 44.5 mm N/A 38.5 mm N/A 100.5 mm N/A 88.9 mm N/A CAD Icon (for items table)
    N/A 100 N/A 51.1 mm N/A 44.5 mm N/A 127.5 mm N/A 114.3 mm N/A CAD Icon (for items table)
    N/A 150 N/A 83.6 mm N/A 76.2 mm N/A 183.1 mm N/A 168.3 mm N/A CAD Icon (for items table)
    N/A 200 N/A 109.9 mm N/A 101.6 mm N/A 236.5 mm N/A 219.1 mm N/A CAD Icon (for items table)
    N/A 250 N/A 146.8 mm N/A 137.4 mm N/A 292.4 mm N/A 273.1 mm N/A CAD Icon (for items table)
    N/A 300 N/A 169.2 mm N/A 158.5 mm N/A 345.2 mm N/A 323.9 mm N/A CAD Icon (for items table)
    1 - 8 of 8 | Results Per Page | View | Unit of Measure
    1