Caps and Plugs
caps-and-plugs-3
Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
Certified by the Canadian Standards Association (CSA) to meet CSA B181.2
Certified by Intertek to CAN/ULC S102.2 for flame and smoke rating of the PVC compound to meet the flame spread (FSC) rating of 25 or less.
Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
Certified by the Canadian Standards Association (CSA) to meet CSA B181.2
Certified by Intertek to CAN/ULC S102.2 for flame and smoke rating of the PVC compound to meet the flame spread (FSC) rating of 25 or less.
Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
Threaded Plug - Raised W/Gasket (Low Rise) -Metric
(6) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Threaded-Plug---Raised-W_Gasket--LR.JPG Cap (H) (Low Rise) -Metric
(8) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Cap--H----LR.JPG
