CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Threaded Plug - Raised W/Gasket -HR
  • Threaded Plug - Raised W_Gasket Schm
  • Certification-LogoTrioK
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    W

    (D1) Ref.

    K

    C

    CAD

    N/A 1 1/2"-11.5 NPSM N/A 39.1 mm N/A 55.6 mm N/A 25.4 mm N/A 15.9 mm N/A CAD Icon (for items table)
    N/A 2"-11.5 NPSM N/A 39.1 mm N/A 66.7 mm N/A 31.8 mm N/A 15.9 mm N/A CAD Icon (for items table)
    N/A 3"-8 NPSM N/A 44.2 mm N/A 100.8 mm N/A 41.4 mm N/A 19.1 mm N/A CAD Icon (for items table)
    N/A 4"-8 NPSM N/A 54.4 mm N/A 127.0 mm N/A 50.8 mm N/A 22.2 mm N/A CAD Icon (for items table)
    N/A 6"-8 NPSM N/A 58.2 mm N/A 181.0 mm N/A 57.2 mm N/A 25.4 mm N/A CAD Icon (for items table)
    N/A 8"-8 NPSM N/A 68.8 mm N/A 236.6 mm N/A 89.0 mm N/A 34.9 mm N/A CAD Icon (for items table)
    1 - 6 of 6 | Results Per Page | View | Unit of Measure
    1