Caps and Plugs
caps-and-plugs-2
Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
Threaded Plug - Raised W/Gasket (High Rise) -Metric
(6) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Threaded-Plug---Raised-W_Gasket--HR.JPG Cap (H) (High Rise) -Metric
(7) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Cap--H----HR.JPG
