CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • U- Bend HxH -HR
  • U-Bend HxH Schm
  • Certification-LogoTrioK
HIGH RISE

1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    L1

    H1

    P1

    (T)

    (W)

    (D1)

    CAD

    N/A 1 1/2" x 1 1/2" N/A 3.50 in N/A 0.70 in N/A 1.90 in N/A 3.22 in N/A 5.74 in N/A 2.23 in N/A CAD Icon (for items table)
    N/A 2" x 2" N/A 5.22 in N/A 0.76 in N/A 2.38 in N/A 4.27 in N/A 7.94 in N/A 2.72 in N/A CAD Icon (for items table)
    N/A 3" x 3" N/A 6.25 in N/A 1.50 in N/A 3.50 in N/A 6.15 in N/A 10.21 in N/A 3.96 in N/A CAD Icon (for items table)
    N/A 4" x 4" N/A 8.06 in N/A 1.75 in N/A 4.50 in N/A 7.74 in N/A 13.08 in N/A 5.02 in N/A CAD Icon (for items table)
    N/A 6" x 6" N/A 12.09 in N/A 3.00 in N/A 6.63 in N/A 11.56 in N/A 19.30 in N/A 7.21 in N/A CAD Icon (for items table)
    1 - 5 of 5 | Results Per Page | View | Unit of Measure
    1