CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Combo Wye & 1/8 Bend HxHxH (2 Piece) -HR
  • Combo Wye & 1_8 Bend HxHxH (2 Piece) Schm
  • Certification-LogoTrioK
HIGH RISE

1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    L1

    L2

    H1

    H2

    C

    (D1)

    P1

    R

    CAD

    N/A 10" x 10" x 4" N/A 7.03 in N/A 12.28 in N/A 5.00 in N/A 1.75 in N/A 3.36 in N/A 11.51 in N/A 10.75 in N/A 13.44 in N/A CAD Icon (for items table)
    N/A 10" x 10" x 6" N/A 9.85 in N/A 13.54 in N/A 5.00 in N/A 3.00 in N/A 5.00 in N/A 11.51 in N/A 10.75 in N/A 16.51 in N/A CAD Icon (for items table)
    N/A 10" x 10" x 8" N/A 12.55 in N/A 15.13 in N/A 5.00 in N/A 4.00 in N/A 6.05 in N/A 11.51 in N/A 10.75 in N/A 19.13 in N/A CAD Icon (for items table)
    N/A 10" x 10" x 10" N/A 15.44 in N/A 18.70 in N/A 5.00 in N/A 5.00 in N/A 7.44 in N/A 11.51 in N/A 10.75 in N/A 22.84 in N/A CAD Icon (for items table)
    1 - 4 of 4 | Results Per Page | View | Unit of Measure
    1