CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • P Trap - HxH-HR
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    (W)

    (T)

    L1(LL)

    L2(LL)

    (D1)

    H1

    CAD

    N/A 40 x 40 N/A 169.8 mm N/A 146.7 mm N/A 123.1 mm N/A 54.1 mm N/A 56.8 mm N/A 17.8 mm N/A CAD Icon (for items table)
    N/A 50 x 50 N/A 229.2 mm N/A 184.8 mm N/A 174.3 mm N/A 61.3 mm N/A 69.6 mm N/A 19.3 mm N/A CAD Icon (for items table)
    N/A 75 x 75 N/A 325.1 mm N/A 284.1 mm N/A 235.0 mm N/A 114.3 mm N/A 101.6 mm N/A 38.1 mm N/A CAD Icon (for items table)
    N/A 100 x 75 N/A 393.9 mm N/A 354.6 mm N/A 290.8 mm N/A 153.2 mm N/A 128.5 mm N/A 45.2 mm N/A CAD Icon (for items table)
    N/A 100 x 100 N/A 412.5 mm N/A 358.4 mm N/A 301.8 mm N/A 141.7 mm N/A 128.5 mm N/A 45.2 mm N/A CAD Icon (for items table)
    1 - 5 of 5 | Results Per Page | View | Unit of Measure
    1