CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Stop Coupling HxH - HR
  • Stop Coupling HxH Schm
  • Certification-LogoTrioK
HIGH RISE

1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    (D1)

    (W)

    H1

    P1

    CAD

    N/A 1 1/2" N/A 2.23 in N/A 1.54 in N/A 0.70 in N/A 1.90 in N/A CAD Icon (for items table)
    N/A 2" N/A 2.70 in N/A 1.66 in N/A 0.75 in N/A 2.38 in N/A CAD Icon (for items table)
    N/A 3" N/A 3.96 in N/A 3.23 in N/A 1.50 in N/A 3.50 in N/A CAD Icon (for items table)
    N/A 4" N/A 5.02 in N/A 3.81 in N/A 1.75 in N/A 4.50 in N/A CAD Icon (for items table)
    N/A 6" N/A 7.21 in N/A 6.34 in N/A 3.00 in N/A 6.63 in N/A CAD Icon (for items table)
    N/A 8" N/A 9.31 in N/A 8.38 in N/A 4.00 in N/A 8.63 in N/A CAD Icon (for items table)
    N/A 10" N/A 11.51 in N/A 10.70 in N/A 5.00 in N/A 10.75 in N/A CAD Icon (for items table)
    1 - 7 of 7 | Results Per Page | View | Unit of Measure
    1