CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Expansion Joint Coupling- Vertical Use Only HxS-LR
LOW RISE

40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

 

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2
  • Certified by Intertek to CAN/ULC S102.2 for flame and smoke rating of the PVC compound to meet the flame spread (FSC) rating of 25 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

 

*Contact Sales for larger sizes and fabricated fittings.

ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

Request Information Compare Items Add to CAD Cart

Part #

Trade Size

(T)

(D1)

P1

H1

H2

L1(LL)

E (Travel)

CAD

N/A 40 x 40 N/A 321.8 mm N/A 56.6 mm N/A 48.3 mm N/A 63.2 mm N/A 27.7 mm N/A 230.9 mm N/A 114.3 mm N/A CAD Icon (for items table)
N/A 50 x 50 N/A 327.7 mm N/A 68.6 mm N/A 60.3 mm N/A 65.3 mm N/A 29.5 mm N/A 232.9 mm N/A 114.3 mm N/A CAD Icon (for items table)
N/A 75 x 75 N/A 517.4 mm N/A 100.5 mm N/A 88.9 mm N/A 101.6 mm N/A 48.3 mm N/A 367.5 mm N/A 203.2 mm N/A CAD Icon (for items table)
N/A 100 x 100 N/A 539.9 mm N/A 127.5 mm N/A 114.3 mm N/A 114.4 mm N/A 53.2 mm N/A 372.2 mm N/A 203.2 mm N/A CAD Icon (for items table)
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1