CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Adjustable Closet Flange - with Plastic Ring and Molded Test Plate-HR
HIGH RISE

1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Add to CAD Cart

    Part #

    Trade Size

    (W)

    (T)

    H1

    (D1)

    P1

    CAD

    N/A 4" x 3" N/A 2.60 in N/A 7.00 in N/A 1.52 in N/A 3.96 in N/A 3.50 in N/A CAD Icon (for items table)
    1 - 1 of 1 | Results Per Page | View | Unit of Measure
    1