CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Fitting Cleanout (SxFIPT) -HR
  • Fitting Cleanout (SxFIPT) Schm
  • Certification-LogoTrioK
HIGH RISE

1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    W

    S1

    (D1) Ref.

    F

    P1

    CAD

    N/A 1 1/2" - 11.5 FIPT N/A 1.52 in N/A 0.71 in N/A 2.24 in N/A 0.64 in N/A 1.90 in N/A CAD Icon (for items table)
    N/A 2" - 11.5 FIPT N/A 1.58 in N/A 0.77 in N/A 2.71 in N/A 0.64 in N/A 2.38 in N/A CAD Icon (for items table)
    N/A 3" - 8 FIPT N/A 2.52 in N/A 1.52 in N/A 3.98 in N/A 0.77 in N/A 3.50 in N/A CAD Icon (for items table)
    N/A 4"-8 FIPT N/A 3.32 in N/A 1.75 in N/A 5.06 in N/A 1.31 in N/A 4.50 in N/A CAD Icon (for items table)
    N/A 6"-8 FIPT N/A 4.82 in N/A 3.00 in N/A 7.18 in N/A 1.53 in N/A 6.63 in N/A CAD Icon (for items table)
    N/A 8"-8 FIPT N/A 6.14 in N/A 4.06 in N/A 9.34 in N/A 1.75 in N/A 8.63 in N/A CAD Icon (for items table)
    1 - 6 of 6 | Results Per Page | View | Unit of Measure
    1