CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • 1/16 Bend (22.5) SxH - HR
  • 1/16 Bend (22.5) SxH Schm
  • Certification-LogoTrioK
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    L1

    L2

    Bend Angle

    (D1) Ref.

    H1

    S1

    T

    W

    P1

    P2

    CAD

    N/A 40 N/A 11.2 mm N/A 11.2 mm N/A 22.5 º N/A 56.6 mm N/A 17.9 mm N/A 17.9 mm N/A 66.7 mm N/A 65.5 mm N/A 48.3 mm N/A 48.3 mm N/A CAD Icon (for items table)
    N/A 50 N/A 16.1 mm N/A 15.9 mm N/A 22.5 º N/A 68.7 mm N/A 19.3 mm N/A 19.5 mm N/A 81.4 mm N/A 79.6 mm N/A 60.5 mm N/A 60.3 mm N/A CAD Icon (for items table)
    N/A 75 N/A 18.8 mm N/A 18.8 mm N/A 22.5 º N/A 100.5 mm N/A 38.6 mm N/A 38.6 mm N/A 129.7 mm N/A 118.7 mm N/A 88.9 mm N/A 88.9 mm N/A CAD Icon (for items table)
    N/A 100 N/A 26.7 mm N/A 26.5 mm N/A 22.5 º N/A 127.5 mm N/A 44.5 mm N/A 44.5 mm N/A 161.2 mm N/A 149.9 mm N/A 114.3 mm N/A 114.3 mm N/A CAD Icon (for items table)
    N/A 150 N/A 36.8 mm N/A 36.8 mm N/A 22.5 º N/A 183.1 mm N/A 76.2 mm N/A 76.2 mm N/A 252.5 mm N/A 219.4 mm N/A 168.3 mm N/A 168.3 mm N/A CAD Icon (for items table)
    N/A 200 N/A 39.6 mm N/A 39.6 mm N/A 22.5 º N/A 236.2 mm N/A 101.6 mm N/A 101.6 mm N/A 316.9 mm N/A 281.3 mm N/A 219.1 mm N/A 219.1 mm N/A CAD Icon (for items table)
    N/A 250 N/A 55.9 mm N/A 55.9 mm N/A 22.5 º N/A 292.1 mm N/A 127.0 mm N/A 127.0 mm N/A 407.7 mm N/A 351.0 mm N/A 273.1 mm N/A 273.1 mm N/A CAD Icon (for items table)
    N/A 300 N/A 61.0 mm N/A 61.0 mm N/A 22.5 º N/A 344.9 mm N/A 152.4 mm N/A 152.4 mm N/A 476.5 mm N/A 413.5 mm N/A 323.9 mm N/A 323.9 mm N/A CAD Icon (for items table)
    1 - 8 of 8 | Results Per Page | View | Unit of Measure
    1