1/16 Bend (22.5) HxH (High Rise) -Metric
Bends & Elbows
HIGH RISE
Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
Part # |
Trade Size |
L1 |
L2 |
Bend Angle |
(D1) Ref. |
H1 |
T |
W |
P1 |
P2 |
CAD |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DH1701 | Trade Size N/A 1 1/2 | L1 N/A 11.1 mm | L2 N/A 11.0 mm | Bend Angle N/A 22.5 º | (D1) Ref. N/A 56.5 mm | H1 N/A 17.7 mm | T N/A 66.2 mm | W N/A 65.4 mm | P1 N/A 48.3 mm | P2 N/A 48.3 mm |
CAD
N/A 
|
| DH1702 | Trade Size N/A 2 | L1 N/A 16.0 mm | L2 N/A 16.0 mm | Bend Angle N/A 22.5 º | (D1) Ref. N/A 68.8 mm | H1 N/A 19.1 mm | T N/A 80.6 mm | W N/A 79.5 mm | P1 N/A 60.3 mm | P2 N/A 60.3 mm |
CAD
N/A
|
| DH1703 | Trade Size N/A 3 | L1 N/A 19.1 mm | L2 N/A 19.1 mm | Bend Angle N/A 22.5 º | (D1) Ref. N/A 100.5 mm | H1 N/A 38.1 mm | T N/A 129.2 mm | W N/A 118.6 mm | P1 N/A 88.9 mm | P2 N/A 88.9 mm |
CAD
N/A
|
| DH1704 | Trade Size N/A 4 | L1 N/A 26.7 mm | L2 N/A 26.7 mm | Bend Angle N/A 22.5 º | (D1) Ref. N/A 127.5 mm | H1 N/A 44.5 mm | T N/A 161.2 mm | W N/A 149.9 mm | P1 N/A 114.3 mm | P2 N/A 114.3 mm |
CAD
N/A
|
| DH1706 | Trade Size N/A 6 | L1 N/A 36.8 mm | L2 N/A 36.8 mm | Bend Angle N/A 22.5 º | (D1) Ref. N/A 183.1 mm | H1 N/A 76.2 mm | T N/A 252.5 mm | W N/A 219.4 mm | P1 N/A 168.3 mm | P2 N/A 168.3 mm |
CAD
N/A
|
| DH1708 | Trade Size N/A 8 | L1 N/A 39.6 mm | L2 N/A 39.6 mm | Bend Angle N/A 22.5 º | (D1) Ref. N/A 236.2 mm | H1 N/A 101.6 mm | T N/A 316.9 mm | W N/A 281.4 mm | P1 N/A 219.1 mm | P2 N/A 219.1 mm |
CAD
N/A
|
| DH17010 | Trade Size N/A 10 | L1 N/A 55.9 mm | L2 N/A 55.9 mm | Bend Angle N/A 22.5 º | (D1) Ref. N/A 292.1 mm | H1 N/A 127.0 mm | T N/A 407.7 mm | W N/A 351.1 mm | P1 N/A 273.1 mm | P2 N/A 273.1 mm |
CAD
N/A
|
| DH17012 | Trade Size N/A 12 | L1 N/A 61.0 mm | L2 N/A 61.0 mm | Bend Angle N/A 22.5 º | (D1) Ref. N/A 344.9 mm | H1 N/A 152.4 mm | T N/A 476.5 mm | W N/A 413.6 mm | P1 N/A 323.9 mm | P2 N/A 323.9 mm |
CAD
N/A
|
