1/16 Bend (22.5) SxH (High Rise)
Bends & Elbows
HIGH RISE
Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
Part # |
Trade Size |
L1 |
L2 |
Bend Angle |
(D1) Ref. |
H1 |
S1 |
T |
W |
P1 |
P2 |
CAD |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DH1711 | Trade Size N/A 1 1/2 | L1 N/A 0.44 in | L2 N/A 0.44 in | Bend Angle N/A 22.5 º | (D1) Ref. N/A 2.23 in | H1 N/A 0.70 in | S1 N/A 0.70 in | T N/A 2.63 in | W N/A 2.58 in | P1 N/A 1.90 in | P2 N/A 1.90 in |
CAD
N/A 
|
| DH1712 | Trade Size N/A 2 | L1 N/A 0.63 in | L2 N/A 0.63 in | Bend Angle N/A 22.5 º | (D1) Ref. N/A 2.71 in | H1 N/A 0.76 in | S1 N/A 0.77 in | T N/A 3.21 in | W N/A 3.13 in | P1 N/A 2.38 in | P2 N/A 2.38 in |
CAD
N/A
|
| DH1713 | Trade Size N/A 3 | L1 N/A 0.74 in | L2 N/A 0.74 in | Bend Angle N/A 22.5 º | (D1) Ref. N/A 3.96 in | H1 N/A 1.52 in | S1 N/A 1.52 in | T N/A 5.11 in | W N/A 4.67 in | P1 N/A 3.50 in | P2 N/A 3.50 in |
CAD
N/A
|
| DH1714 | Trade Size N/A 4 | L1 N/A 1.05 in | L2 N/A 1.05 in | Bend Angle N/A 22.5 º | (D1) Ref. N/A 5.02 in | H1 N/A 1.75 in | S1 N/A 1.75 in | T N/A 6.35 in | W N/A 5.90 in | P1 N/A 4.50 in | P2 N/A 4.50 in |
CAD
N/A
|
| DH1716 | Trade Size N/A 6 | L1 N/A 1.45 in | L2 N/A 1.45 in | Bend Angle N/A 22.5 º | (D1) Ref. N/A 7.21 in | H1 N/A 3.00 in | S1 N/A 3.00 in | T N/A 9.94 in | W N/A 8.64 in | P1 N/A 6.63 in | P2 N/A 6.63 in |
CAD
N/A
|
| DH1718 | Trade Size N/A 8 | L1 N/A 1.56 in | L2 N/A 1.56 in | Bend Angle N/A 22.5 º | (D1) Ref. N/A 9.30 in | H1 N/A 4.00 in | S1 N/A 4.00 in | T N/A 12.48 in | W N/A 11.07 in | P1 N/A 8.63 in | P2 N/A 8.63 in |
CAD
N/A
|
| DH17110 | Trade Size N/A 10 | L1 N/A 2.20 in | L2 N/A 2.20 in | Bend Angle N/A 22.5 º | (D1) Ref. N/A 11.50 in | H1 N/A 5.00 in | S1 N/A 5.00 in | T N/A 16.05 in | W N/A 13.82 in | P1 N/A 10.75 in | P2 N/A 10.75 in |
CAD
N/A
|
