1/4 Bend (90) Vent SxH (High Rise) -Metric On Westlake Pipe & Fittings

CAD (0) ▾

HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.

Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.

Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.

Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

*Contact Sales for larger sizes and fabricated fittings.

ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

Request Information Compare Items Add to CAD Cart

Part #	Trade Size	L1	L2	Bend Angle	(D1) Ref.	H1	S1	T	W	P1	P2	CAD

DH226	N/A 150	N/A 92.5 mm	N/A 92.7 mm	N/A 90 º	N/A 183.1 mm	N/A 76.2 mm	N/A 76.2 mm	N/A 260.3 mm	N/A 260.3 mm	N/A 168.3 mm	N/A 168.3 mm	N/A
DH228	N/A 200	N/A 120.9 mm	N/A 115.6 mm	N/A 90 º	N/A 236.2 mm	N/A 101.6 mm	N/A 101.6 mm	N/A 340.6 mm	N/A 335.3 mm	N/A 219.1 mm	N/A 219.1 mm	N/A
DH2210	N/A 250	N/A 165.1 mm	N/A 165.1 mm	N/A 90 º	N/A 292.1 mm	N/A 127.0 mm	N/A 127.0 mm	N/A 438.2 mm	N/A 438.2 mm	N/A 273.1 mm	N/A 273.1 mm	N/A

1 - 3 of 3 | Results Per Page | View | Unit of Measure

Email ^*
First Name ^*
Last Name ^*
Company ^*
Project Name
Project Location
Country ^*
Zip/Postal Code ^*
reCAPTCHA