CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • M-J Spigot Adapter
HIGH RISE

1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    (W)

    (D3)

    H1

    S1

    L1(LL)

    D1

    D2

    CAD

    N/A 2" x 2" N/A 2.56 in N/A 2.70 in N/A 0.77 in N/A 1.13 in N/A 0.25 in N/A 2.41 in N/A 2.48 in N/A CAD Icon (for items table)
    N/A 3" x 3" N/A 3.63 in N/A 3.96 in N/A 1.52 in N/A 1.13 in N/A 0.41 in N/A 3.42 in N/A 3.48 in N/A CAD Icon (for items table)
    N/A 4" x 4" N/A 4.08 in N/A 5.02 in N/A 1.78 in N/A 1.13 in N/A 0.44 in N/A 4.46 in N/A 4.53 in N/A CAD Icon (for items table)
    N/A 4" x 3" N/A 3.76 in N/A 3.96 in N/A 1.52 in N/A 1.13 in N/A 0.35 in N/A 4.45 in N/A 4.51 in N/A CAD Icon (for items table)
    1 - 4 of 4 | Results Per Page | View | Unit of Measure
    1