CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • M-J Spigot Adapter
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Compare Items Add to CAD Cart

    Part #

    Trade Size

    (W)

    (D3)

    H1

    S1

    L1(LL)

    D1

    D2

    CAD

    N/A 50 x 50 N/A 65.1 mm N/A 68.6 mm N/A 19.6 mm N/A 28.7 mm N/A 6.4 mm N/A 61.1 mm N/A 63.0 mm N/A CAD Icon (for items table)
    N/A 75 x 75 N/A 92.1 mm N/A 100.5 mm N/A 38.6 mm N/A 28.6 mm N/A 10.4 mm N/A 86.9 mm N/A 88.4 mm N/A CAD Icon (for items table)
    N/A 100 x 75 N/A 95.5 mm N/A 100.5 mm N/A 38.5 mm N/A 28.7 mm N/A 8.8 mm N/A 113.0 mm N/A 114.6 mm N/A CAD Icon (for items table)
    N/A 100 x 100 N/A 103.6 mm N/A 127.5 mm N/A 45.2 mm N/A 28.6 mm N/A 11.2 mm N/A 113.3 mm N/A 115.1 mm N/A CAD Icon (for items table)
    1 - 4 of 4 | Results Per Page | View | Unit of Measure
    1