1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
Trade Size |
N/A 6" x 4" |
Configuration |
N/A SxH |
Construction |
N/A Molded fitting |
Material |
N/A PVC |
Color |
N/A Dark Gray |
(W) Ref. |
N/A 6.43 in |
P1 Nominal Pipe Diameter |
N/A 4.50 in |
P2 Nominal Pipe Diameter |
N/A 6.63 in |
(D1) Ref. |
N/A 5.02 in |
D2 |
N/A 7.22 in |
L1(LL) |
N/A 1.65 in |
S1 |
N/A 3.03 in |
H1 |
N/A 1.75 in |
Applications |
N/A
The most complex installations require the most advanced fittings. Injection molded DWV fittings from Westlake Pipe & Fittings eliminate typical problems resulting from installing a DWV system with inconsistent, inaccurate, or non-certified fittings. When installing or specifying DWV you can count on a 45° bend being exactly that, a 45° bend. Literally from every angle, Westlake understands the importance of accuracy and consistency on the job site and provides you with a perfect fit from roof to grade. Our DWV fittings make installation of the system quicker, easier and less costly. Productivity gains are significant when our DWV fittings are specified and installed. Combine with our fabricated fittings to ensure a trouble-free installation. |
Certification |
N/A
|