Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    U- Bend HxH -HR
    Unit of Measure
    1 

    Part #

    Trade Size

    L1

    H1

    P1

    (T)

    (W)

    (D1)

    CAD

    DH1811 N/A 40 x 40 N/A 89.0 mm N/A 17.8 mm N/A 48.3 mm N/A 81.9 mm N/A 145.7 mm N/A 56.7 mm N/A CAD Icon (for items table)
    DH1822 N/A 50 x 50 N/A 132.6 mm N/A 19.2 mm N/A 60.3 mm N/A 108.5 mm N/A 201.7 mm N/A 69.1 mm N/A CAD Icon (for items table)
    DH1833 N/A 75 x 75 N/A 158.8 mm N/A 38.1 mm N/A 88.9 mm N/A 156.2 mm N/A 259.3 mm N/A 100.5 mm N/A CAD Icon (for items table)
    DH1844 N/A 100 x 100 N/A 204.7 mm N/A 44.5 mm N/A 114.3 mm N/A 196.6 mm N/A 332.2 mm N/A 127.5 mm N/A CAD Icon (for items table)
    DH1866 N/A 150 x 150 N/A 307.1 mm N/A 76.2 mm N/A 168.3 mm N/A 293.6 mm N/A 490.2 mm N/A 183.1 mm N/A CAD Icon (for items table)
    Unit of Measure
    1