Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Combo Wye & 1/8 Bend HxHxH (2 Piece) -HR
    Unit of Measure
    1 

    Part #

    Trade Size

    L1

    L2

    H1

    H2

    C

    (D1)

    P1

    R

    CAD

    DH16510-4 N/A 250 x 250 x 100 N/A 178.6 mm N/A 311.8 mm N/A 127.0 mm N/A 44.5 mm N/A 85.3 mm N/A 292.4 mm N/A 273.1 mm N/A 341.4 mm N/A CAD Icon (for items table)
    DH16510-6 N/A 250 x 250 x 150 N/A 250.1 mm N/A 344.0 mm N/A 127.0 mm N/A 76.2 mm N/A 127.0 mm N/A 292.4 mm N/A 273.1 mm N/A 419.4 mm N/A CAD Icon (for items table)
    DH16510-8 N/A 250 x 250 x 200 N/A 318.7 mm N/A 384.4 mm N/A 127.0 mm N/A 101.6 mm N/A 153.6 mm N/A 292.4 mm N/A 273.1 mm N/A 485.9 mm N/A CAD Icon (for items table)
    DH16510 N/A 250 x 250 x 250 N/A 392.1 mm N/A 475.0 mm N/A 127.0 mm N/A 127.0 mm N/A 188.9 mm N/A 292.4 mm N/A 273.1 mm N/A 580.2 mm N/A CAD Icon (for items table)
    Unit of Measure
    1