Expansion Joint Coupling HxH (High Rise) -Metric On Westlake Pipe & Fittings

HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.

Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.

Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.

Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

*Contact Sales for larger sizes and fabricated fittings.

ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

Part #	Trade Size	(T)	(D1)	P1	H1	H2	L1(LL)	E (Travel)	CAD
DH631	N/A 40 x 40	N/A 286.3 mm	N/A 56.6 mm	N/A 48.3 mm	N/A 27.7 mm	N/A 27.7 mm	N/A 230.9 mm	N/A 114.3 mm	N/A
DH632	N/A 50 x 50	N/A 291.8 mm	N/A 68.6 mm	N/A 60.3 mm	N/A 29.5 mm	N/A 29.5 mm	N/A 232.9 mm	N/A 114.3 mm	N/A
DH633	N/A 75 x 75	N/A 463.6 mm	N/A 100.5 mm	N/A 88.9 mm	N/A 48.3 mm	N/A 48.3 mm	N/A 367.0 mm	N/A 203.2 mm	N/A
DH634	N/A 100 x 100	N/A 479.0 mm	N/A 127.5 mm	N/A 114.3 mm	N/A 53.3 mm	N/A 53.3 mm	N/A 372.4 mm	N/A 203.2 mm	N/A