Fitting Cleanout (SxFIPT) (High Rise) -Metric On Westlake Pipe & Fittings

HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.

Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.

Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.

Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

*Contact Sales for larger sizes and fabricated fittings.

ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

Part #	Trade Size	W	S1	(D1) Ref.	F	P1	CAD
DH1501	N/A 1 1/2" - 11.5 FIPT	N/A 38.6 mm	N/A 18.0 mm	N/A 56.9 mm	N/A 16.3 mm	N/A 48.3 mm	N/A
DH1502	N/A 2" - 11.5 FIPT	N/A 40.1 mm	N/A 19.5 mm	N/A 68.8 mm	N/A 16.3 mm	N/A 60.5 mm	N/A
DH1503	N/A 3" - 8 FIPT	N/A 64.0 mm	N/A 38.6 mm	N/A 101.1 mm	N/A 19.6 mm	N/A 88.9 mm	N/A
DH1504	N/A 4"-8 FIPT	N/A 84.3 mm	N/A 44.5 mm	N/A 128.6 mm	N/A 33.3 mm	N/A 114.3 mm	N/A
DH1506	N/A 6"-8 FIPT	N/A 122.3 mm	N/A 76.2 mm	N/A 182.2 mm	N/A 38.8 mm	N/A 168.3 mm	N/A
DH1508	N/A 8"-8 FIPT	N/A 156.0 mm	N/A 103.1 mm	N/A 237.1 mm	N/A 44.3 mm	N/A 219.1 mm	N/A