Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Fitting Cleanout with Gasketed Plug (SxFIPT) - HR
    Unit of Measure
    1 

    Part #

    Trade Size

    W

    E

    (D1) Ref.

    S1

    F

    P2

    CAD

    DH9501G N/A 40 x 40 N/A 38.6 mm N/A 67.2 mm N/A 56.9 mm N/A 18.0 mm N/A 16.3 mm N/A 48.3 mm N/A CAD Icon (for items table)
    DH9502G N/A 50 x 50 N/A 40.1 mm N/A 68.7 mm N/A 68.8 mm N/A 19.5 mm N/A 16.3 mm N/A 60.5 mm N/A CAD Icon (for items table)
    DH9503G N/A 75 x 75 N/A 64.0 mm N/A 94.5 mm N/A 101.1 mm N/A 38.6 mm N/A 19.6 mm N/A 88.9 mm N/A CAD Icon (for items table)
    DH9504G N/A 100 x 100 N/A 84.3 mm N/A 121.9 mm N/A 128.6 mm N/A 44.5 mm N/A 33.3 mm N/A 114.3 mm N/A CAD Icon (for items table)
    DH9506G N/A 150 x 150 N/A 122.3 mm N/A 160.5 mm N/A 182.2 mm N/A 76.2 mm N/A 38.8 mm N/A 168.3 mm N/A CAD Icon (for items table)
    DH9508G N/A 200 x 200 N/A 156.0 mm N/A 195.2 mm N/A 237.1 mm N/A 103.1 mm N/A 44.3 mm N/A 219.1 mm N/A CAD Icon (for items table)
    Unit of Measure
    1