Threaded Plug - Raised W/Gasket (High Rise) -Metric On Westlake Pipe & Fittings

HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.

Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.

Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.

Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

*Contact Sales for larger sizes and fabricated fittings.

ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

Part #	Trade Size	W	(D1) Ref.	K	C	CAD
DH1151G	N/A 1 1/2"-11.5 NPSM	N/A 39.1 mm	N/A 55.6 mm	N/A 25.4 mm	N/A 15.9 mm	N/A
DH1152G	N/A 2"-11.5 NPSM	N/A 39.1 mm	N/A 66.7 mm	N/A 31.8 mm	N/A 15.9 mm	N/A
DH1153G	N/A 3"-8 NPSM	N/A 44.2 mm	N/A 100.8 mm	N/A 41.4 mm	N/A 19.1 mm	N/A
DH1154G	N/A 4"-8 NPSM	N/A 54.4 mm	N/A 127.0 mm	N/A 50.8 mm	N/A 22.2 mm	N/A
DH1156G	N/A 6"-8 NPSM	N/A 58.2 mm	N/A 181.0 mm	N/A 57.2 mm	N/A 25.4 mm	N/A
DH1158G	N/A 8"-8 NPSM	N/A 68.8 mm	N/A 236.6 mm	N/A 89.0 mm	N/A 34.9 mm	N/A