Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Cap (H) - HR
    Unit of Measure
    1 

    Part #

    Trade Size

    (W)

    H1

    (D1)

    P1

    CAD

    DH1601 N/A 40 N/A 22.1 mm N/A 17.9 mm N/A 56.6 mm N/A 48.3 mm N/A CAD Icon (for items table)
    DH1602 N/A 50 N/A 23.7 mm N/A 19.5 mm N/A 68.6 mm N/A 60.3 mm N/A CAD Icon (for items table)
    DH1603 N/A 75 N/A 44.5 mm N/A 38.5 mm N/A 100.5 mm N/A 88.9 mm N/A CAD Icon (for items table)
    DH1604 N/A 100 N/A 51.1 mm N/A 44.5 mm N/A 127.5 mm N/A 114.3 mm N/A CAD Icon (for items table)
    DH1606 N/A 150 N/A 83.6 mm N/A 76.2 mm N/A 183.1 mm N/A 168.3 mm N/A CAD Icon (for items table)
    DH1608 N/A 200 N/A 109.9 mm N/A 101.6 mm N/A 236.5 mm N/A 219.1 mm N/A CAD Icon (for items table)
    DH16010 N/A 250 N/A 146.8 mm N/A 137.4 mm N/A 292.4 mm N/A 273.1 mm N/A CAD Icon (for items table)
    Unit of Measure
    1