Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Reducer Bushing - Threaded-HR
    Unit of Measure
    1 

    Part #

    Trade Size

    (W)

    (D1)

    H1

    F

    THD

    CAD

    DH12501-15T N/A 40 x 15 N/A 23.8 mm N/A 56.9 mm N/A 19.1 mm N/A 13.3 mm N/A 1/2 N/A CAD Icon (for items table)
    DH12501-75T N/A 40 x 20 N/A 23.9 mm N/A 56.9 mm N/A 19.1 mm N/A 13.8 mm N/A 3/4 N/A CAD Icon (for items table)
    DH12502-1T N/A 50 x 40 N/A 26.9 mm N/A 68.2 mm N/A 22.1 mm N/A 19.7 mm N/A 1 1/2 N/A CAD Icon (for items table)
    Unit of Measure
    1