Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    1/8 Bend (45) HxH - HR
    Unit of Measure
    1 

    Part #

    Trade Size

    L1

    L2

    Bend Angle

    (D1) Ref.

    H1

    T

    W

    P1

    P2

    CAD

    DH501SS N/A 40 N/A 14.4 mm N/A 14.4 mm N/A 45 º N/A 56.6 mm N/A 17.7 mm N/A 74.6 mm N/A 70.9 mm N/A 48.3 mm N/A 48.3 mm N/A CAD Icon (for items table)
    DH502SS N/A 50 N/A 17.1 mm N/A 17.1 mm N/A 45 º N/A 69.4 mm N/A 19.2 mm N/A 86.5 mm N/A 84.5 mm N/A 60.3 mm N/A 60.3 mm N/A CAD Icon (for items table)
    DH503SS N/A 75 N/A 24.6 mm N/A 24.6 mm N/A 45 º N/A 100.8 mm N/A 38.1 mm N/A 142.8 mm N/A 130.3 mm N/A 88.9 mm N/A 88.9 mm N/A CAD Icon (for items table)
    DH504SS N/A 100 N/A 30.7 mm N/A 30.7 mm N/A 45 º N/A 127.5 mm N/A 44.5 mm N/A 173.4 mm N/A 162.0 mm N/A 114.3 mm N/A 114.3 mm N/A CAD Icon (for items table)
    DH506SS N/A 150 N/A 51.4 mm N/A 51.7 mm N/A 45 º N/A 183.1 mm N/A 76.1 mm N/A 282.5 mm N/A 246.5 mm N/A 168.3 mm N/A 168.3 mm N/A CAD Icon (for items table)
    DH508SS N/A 200 N/A 51.9 mm N/A 51.9 mm N/A 45 º N/A 236.2 mm N/A 101.6 mm N/A 345.6 mm N/A 310.3 mm N/A 219.1 mm N/A 219.1 mm N/A CAD Icon (for items table)
    DH5010SS N/A 250 N/A 83.7 mm N/A 83.7 mm N/A 45 º N/A 292.1 mm N/A 127.0 mm N/A 462.9 mm N/A 398.4 mm N/A 273.1 mm N/A 273.1 mm N/A CAD Icon (for items table)
    Unit of Measure
    1