Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    1/4 Bend (90) Vent HxH - HR
    Unit of Measure
    1 

    Part #

    Trade Size

    L1

    L2

    Bend Angle

    (D1) Ref.

    H1

    T

    W

    P1

    P2

    CAD

    DH206 N/A 150 N/A 89.3 mm N/A 89.3 mm N/A 90 º N/A 183.1 mm N/A 76.2 mm N/A 257.0 mm N/A 257.0 mm N/A 168.3 mm N/A 168.3 mm N/A CAD Icon (for items table)
    DH208 N/A 200 N/A 115.6 mm N/A 115.6 mm N/A 90 º N/A 236.5 mm N/A 101.6 mm N/A 335.4 mm N/A 335.4 mm N/A 219.1 mm N/A 219.1 mm N/A CAD Icon (for items table)
    DH2010 N/A 250 N/A 165.1 mm N/A 165.1 mm N/A 90 º N/A 292.1 mm N/A 127.0 mm N/A 438.2 mm N/A 438.2 mm N/A 273.1 mm N/A 273.1 mm N/A CAD Icon (for items table)
    Unit of Measure
    1