Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back
HIGH RISE

40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    1/16 Bend (22.5) HxH - HR
    Unit of Measure
    1 

    Part #

    Trade Size

    L1

    L2

    Bend Angle

    (D1) Ref.

    H1

    T

    W

    P1

    P2

    CAD

    DH1701 N/A 1 1/2 N/A 11.1 mm N/A 11.0 mm N/A 22.5 º N/A 56.5 mm N/A 17.7 mm N/A 66.2 mm N/A 65.4 mm N/A 48.3 mm N/A 48.3 mm N/A CAD Icon (for items table)
    DH1702 N/A 2 N/A 16.0 mm N/A 16.0 mm N/A 22.5 º N/A 68.8 mm N/A 19.1 mm N/A 80.6 mm N/A 79.5 mm N/A 60.3 mm N/A 60.3 mm N/A CAD Icon (for items table)
    DH1703 N/A 3 N/A 19.1 mm N/A 19.1 mm N/A 22.5 º N/A 100.5 mm N/A 38.1 mm N/A 129.2 mm N/A 118.6 mm N/A 88.9 mm N/A 88.9 mm N/A CAD Icon (for items table)
    DH1704 N/A 4 N/A 26.7 mm N/A 26.7 mm N/A 22.5 º N/A 127.5 mm N/A 44.5 mm N/A 161.2 mm N/A 149.9 mm N/A 114.3 mm N/A 114.3 mm N/A CAD Icon (for items table)
    DH1706 N/A 6 N/A 36.8 mm N/A 36.8 mm N/A 22.5 º N/A 183.1 mm N/A 76.2 mm N/A 252.5 mm N/A 219.4 mm N/A 168.3 mm N/A 168.3 mm N/A CAD Icon (for items table)
    DH1708 N/A 8 N/A 39.6 mm N/A 39.6 mm N/A 22.5 º N/A 236.2 mm N/A 101.6 mm N/A 316.9 mm N/A 281.4 mm N/A 219.1 mm N/A 219.1 mm N/A CAD Icon (for items table)
    DH17010 N/A 10 N/A 55.9 mm N/A 55.9 mm N/A 22.5 º N/A 292.1 mm N/A 127.0 mm N/A 407.7 mm N/A 351.1 mm N/A 273.1 mm N/A 273.1 mm N/A CAD Icon (for items table)
    Unit of Measure
    1