Westlake Pipe & Fittings
Corporate Headquarters
2801 Post Oak Blvd., Suite 600
Houston, TX 77056, USA
Phone: 713-840-7473
Fax: 713-552-0087
Website: www.westlakepipe.com
Print Back

1 1/2” through 12”* injection molded solvent weld Drain, Waste, and Vent (DWV) fittings shall be manufactured in accordance with ASTM D2665, F1866, F2135, and CSA B181.2, as applicable. Injection molded solvent weld DWV fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D2665 and ASTM F2135, as applicable; and by the Canadian Standards Association (CSA) to meet CSA B181.2 as applicable. They shall be certified by the International Association of Plumbing andmore

Sanitary-Tee--T-Y--HxHxH
Unit of Measure
Items Sanitary Tee (T-Y) HxHxH Schm
D151
1 1/2" x 1 1/2" SANITARY TEE (T-Y) HxHxH 		Sanitary Tee (T-Y) HxHxH Schm
D152
2" x 2" SANITARY TEE (T-Y) HxHxH 		Sanitary Tee (T-Y) HxHxH Schm
D152-1-1
2" x 1 1/2" x 1 1/2" SANITARY TEE (T-Y) HxHxH 		Sanitary Tee (T-Y) HxHxH Schm
D152-1-2
2" x 1 1/2" x 2" SANITARY TEE (T-Y) HxHxH 		Sanitary Tee (T-Y) HxHxH Schm
D152-1
2" x 1 1/2" SANITARY TEE (T-Y) HxHxH
Trade Size N/A 1 1/2"x 1 1/2"x 1 1/2" N/A 2"x 2"x 2" N/A 2"x 1 1/2"x 1 1/2" N/A 2"x 1 1/2"x 2" N/A 2"x 2"x 1 1/2"
Configuration N/A HxHxH
Construction N/A Molded fitting
Material N/A PVC
Color N/A White
H1 Minimum N/A 0.69 in N/A 0.75 in N/A 0.69 in N/A 0.70 in N/A 0.75 in
H2 Minimum N/A 0.69 in N/A 0.75 in N/A 0.69 in N/A 0.75 in N/A 0.69 in
C N/A 2.39 in N/A 3.02 in N/A 2.65 in N/A 3.02 in N/A 2.64 in
(D1) Ref. N/A 2.23 in N/A 2.70 in N/A 2.70 in N/A 2.70 in N/A 2.70 in
P1 Nominal Pipe Diameter N/A 1.90 in N/A 2.38 in N/A 1.90 in N/A 1.90 in N/A 2.38 in
(W) Ref. N/A 3.51 in N/A 4.38 in N/A 4.19 in N/A 4.38 in N/A 4.19 in
(T) Ref. N/A 4.00 in N/A 5.06 in N/A 4.45 in N/A 5.03 in N/A 4.50 in