Westlake Pipe & Fittings - Test Tee with Gasketed Plug HxHxFIPT (High Rise)

CAD (0) ▾

HIGH RISE

1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.

Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.

Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.

Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

*Contact Sales for larger sizes and fabricated fittings.

ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

Request Information Add to CAD Cart

Unit of Measure

Items	DH12901G 1 1/2" TEST TEE WITH GASKET PLUG	DH12902G 2" TEST TEE WITH GASKET PLUG	DH12903G 3" TEST TEE WITH GASKET PLUG	DH12904-3G 4" x 3" x 4" CLEANOUT TEE w/SEALED FLANGE PLUG	DH12904G 4" TEST TEE WITH GASKET PLUG
Trade Size	N/A 1 1/2"x 1 1/2"x 1 1/2"	N/A 2"x 2"x 2"	N/A 3"x 3"x 3"	N/A 4"x 3"x 4"	N/A 4"x 4"x 4"
Configuration	N/A HxHxFIPT
Construction	N/A Assembled from molded components
Material	N/A PVC Buna-N (O-Ring)
Color	N/A Dark Gray
H1 Minimum	N/A 0.69 in	N/A 0.75 in	N/A 1.50 in	N/A 1.75 in	N/A 1.75 in
H2 Minimum	N/A 0.69 in	N/A 0.75 in	N/A 1.50 in	N/A 1.75 in	N/A 1.75 in
F	N/A 0.64 in	N/A 0.64 in	N/A 0.77 in	N/A 1.31 in	N/A 1.31 in
P1 Nominal Pipe Diameter	N/A 1.90 in	N/A 2.38 in	N/A 3.50 in	N/A 4.50 in	N/A 4.50 in
(T) Ref.	N/A 3.62 in	N/A 4.38 in	N/A 6.75 in	N/A 9.00 in	N/A 8.75 in
(W) Ref.	N/A 4.01 in	N/A 4.56 in	N/A 5.83 in	N/A 7.60 in	N/A 7.60 in
(D1) Ref.	N/A 2.23 in	N/A 2.70 in	N/A 3.96 in	N/A 5.02 in	N/A 5.02 in