Westlake Pipe & Fittings - Combo Wye & 1/8 Bend HxHxH (2 Piece) (Low Rise) -Metric

CAD (0) ▾

LOW RISE

40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.

Certified by the Canadian Standards Association (CSA) to meet CSA B181.2

Certified by Intertek to CAN/ULC S102.2 for flame and smoke rating of the PVC compound to meet the flame spread (FSC) rating of 25 or less.

Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

*Contact Sales for larger sizes and fabricated fittings.

ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

Request Information Add to CAD Cart

Unit of Measure

Items	DL16510-4 250 x 100mm/10" x 4" COMBO WYE & 1/8 BEND HxHxH (2 PIECE)	DL16510-6 250 x 150mm/10" x 6" COMBO WYE & 1/8 BEND HxHxH (2 PIECE)	DL16510-8 250 x 200mm/10" x 8" COMBO WYE & 1/8 BEND HxHxH (2 PIECE)	DL16510 250 x 250mm/10" x 10" COMBO WYE & 1/8 BEND HxHxH (2 PIECE)	DL16512-4 300 x 100mm/12" x 4" COMBO WYE & 1/8 BEND HxHxH (2 PIECE)
Trade Size	N/A 250 x 250 x 100	N/A 250 x 250 x 150	N/A 250 x 250 x 200	N/A 250 x 250 x 250	N/A 300 x 300 x 100
Configuration	N/A HxHxH
Construction	N/A Assembled from molded components
Material	N/A PVC
Color	N/A Light Gray
H1 Minimum	N/A 127.0 mm	N/A 127.0 mm	N/A 127.0 mm	N/A 127.0 mm	N/A 152.4 mm
H2 Minimum	N/A 44.5 mm	N/A 76.2 mm	N/A 101.6 mm	N/A 127.0 mm	N/A 44.5 mm
C	N/A 85.3 mm	N/A 127.0 mm	N/A 153.6 mm	N/A 188.9 mm	N/A 84.8 mm
(D1) Ref.	N/A 292.4 mm	N/A 292.4 mm	N/A 292.4 mm	N/A 292.4 mm	N/A 345.2 mm
P1 Nominal Pipe Diameter	N/A 273.1 mm	N/A 273.1 mm	N/A 273.1 mm	N/A 273.1 mm	N/A 323.9 mm
R	N/A 341.4 mm	N/A 419.4 mm	N/A 485.9 mm	N/A 580.2 mm	N/A 368.6 mm