CAD (0) ▾
  • Cart is empty
  1. Request CAD files
HIGH RISE

1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:

  • Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
  • Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
  • Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
  • Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.

    • *Contact Sales for larger sizes and fabricated fittings.

    ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.

    Request Information Add to CAD Cart
    Unit of Measure
    Items
    P Trap - HxH-HR

    1 1/2" P-TRAP
    P Trap - HxH-HR

    2" P-TRAP
    P Trap - HxH-HR

    3" P-TRAP
    P Trap - HxH-HR

    4" x 3" P-TRAP
    P Trap - HxH-HR

    4" P-TRAP
    Trade Size N/A 1 1/2" x 1 1/2" N/A 2" x 2" N/A 3" x 3" N/A 4" x 3" N/A 4" x 4"
    Configuration N/A HxH
    Construction N/A Assembled from molded components
    Material N/A PVC
    Color N/A Dark Gray
    (W) Ref. N/A 6.69 in N/A 9.02 in N/A 12.80 in N/A 15.51 in N/A 16.24 in
    (T) Ref. N/A 5.77 in N/A 7.28 in N/A 11.19 in N/A 13.96 in N/A 14.11 in
    L1(LL) N/A 4.85 in N/A 6.86 in N/A 9.25 in N/A 11.45 in N/A 11.88 in
    L2(LL) N/A 2.13 in N/A 2.42 in N/A 4.50 in N/A 6.03 in N/A 5.58 in
    (D1) Ref. N/A 2.24 in N/A 2.74 in N/A 4.00 in N/A 5.06 in N/A 5.06 in
    H1 N/A 0.70 in N/A 0.76 in N/A 1.50 in N/A 1.78 in N/A 1.78 in