45° Wye HxHxH (High Rise) -Metric
(20) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/45--Wye-HxHxH---HR.JPG
45° Wye SxHxH (High Rise) -Metric
(9) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/45--Wye-SxHxH.JPG
Double 45° Wye HxHxH (High Rise) -Metric
(14) HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Double-45--Wye-HxHxH---HR.JPG
45° Wye - Upright Extended HxHxS (High Rise) -Metric
HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/45--Wye---Upright-Extended-HxHxS.JPG
Dishwasher Wye HxHxHose Barb (High Rise) -Metric
HIGH RISE40 mm through 250 mm* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
- Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
- Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
- Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
- Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Diswasher-Wey-HxHxHose-Barb.JPG
