Closet Flange - One Piece (DWV Pipe) (High Rise)
(2) HIGH RISE1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
- Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
- Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
- Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
- Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Closet-Flange---One-Piece.JPG Closet Flange - One Piece (High Rise)
(2) HIGH RISE1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
- Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
- Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
- Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
- Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Closet-Flange---One-Piece.JPG Closet Flange - One Piece Flush Fit (High Rise)
HIGH RISE1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Closet-Flange---One-Piece.JPG
Closet Flange - One Piece Flush Fit with Molded Test Plate (High Rise)
HIGH RISE1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Closet-Flange---One-Piece-with-Molded-Test-Plate.JPG Closet Flange - One Piece With Molded Test Plate (High Rise)
(2) HIGH RISE1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
- Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
- Certified by the Canadian Standards Association (CSA) to meet CSA B181.2.
- Certified by QAI to CAN/ULC S102.2 for the PVC compound to meet the flame spread rating of 0 and smoke development classification of 50 or less.
- Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Closet-Flange---One-Piece-with-Molded-Test-Plate.JPG
Closet Flange Kit for Concrete (High Rise)
HIGH RISE1 ½” through 10”* NAPSYS-HR PVC DWV 25/50 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/Closet-Flange-Kit-for-Concrete.JPG
