1/4 Bend (90) Vent HxH (Low Rise) -Metric
(4) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_4-Bend--90--Vent-HxH---LR.JPG
1/4 Bend (90) Vent SxH (Low Rise) -Metric
(4) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_4-Bend--90--Vent-SxH---LR.JPG
1/4 Bend (90) HxH Long Sweep (Low Rise) -Metric
(14) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_4-Bend--90--HxH-Long-Sweep--LR.JPG
1/4 Bend (90) SxH Long Sweep (Low Rise) -Metric
(13) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_4-Bend--90--SxH-Long-Sweep--LR.JPG
1/4 Bend (90) Reducing Elbow SxH (Low Rise) -Metric
LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_4-Bend--90--Reducing-Elbow-SxH--LR.JPG
1/4 Bend (90) Reducing HxH (Low Rise) -Metric
LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
- Manufactured in accordance with CSA B181.2 and CAN/ULC S102.2 as applicable.
- Certified by the Canadian Standards Association (CSA) to meet CSA B181.2
- Certified by Intertek to CAN/ULC S102.2 for flame and smoke rating of the PVC compound to meet the flame spread (FSC) rating of 25 or less.
- Manufactured from PVC with cell class of 12454 when tested in accordance with ASTM D1784.
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_4-Bend--90--Reducing-Elbow-HxH--LR.JPG
1/6 Bend (60°) HxH (Low Rise) -Metric
(4) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_6-Bend--60---HxH--LR.JPG
1/8 Bend (45) HxH (Low Rise) -Metric
(8) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_8-Bend--45--HxH---LR.JPG
1/8 Bend (45) SxH (Low Rise) -Metric
(8) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_8-Bend--45--SxH---LR.JPG
1/16 Bend (22.5) HxH (Low Rise) -Metric
(8) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_16-Bend--22-5--HxH---LR.JPG
1/16 Bend (22.5) SxH (Low Rise) -Metric
(8) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/1_16-Bend--22-5--SxH---LR.JPG
90° Pipe Trap Adapter (Low Rise) -Metric
(2) LOW RISE40 mm through 300 mm* NAPSYS-LR PVC DWV 25 injection molded solvent weld Drain, Waste and Vent (DWV) fittings are:
*Contact Sales for larger sizes and fabricated fittings.
ATTENTION: DWV fittings manufactured by Westlake Pipe and Fittings are intended for non-pressure applications and are not to be used with compressed air or gases.
/Asset/90---Pipe-Trap-Adapter--LR.JPG
